Back
Back

 

Overview

This guide will provide instructions for rebooting (power cycling) a Shaw Modem which is connected to a router. Common router brands include D-link, Netgear, Linksys and Belkin.

 

Details

  1. Unplug the power from your Shaw Modem, leaving all other connections secure
  2. Unplug the power from your router and wait at least 30 seconds
  3. Plug the power back into your Shaw Modem only
  4. Wait until the Shaw Modem comes back online, as indicated by a steady Online light (this may take a few minutes depending on the model of Shaw Modem that you have)
  5. Plug the power back into your router
  6. Restart your computer and test your Internet connection

 

outlet-modem-router

 

If you are still experiencing issues after following the above steps, please follow these steps to bypass your router:

 

  1. Unplug the power from your Shaw Modem and shut down your computer
  2. Disconnect the network (ethernet) cable from the back of the router and plug this cable into your computer, establishing a direct connection between your Shaw Modem and computer
  3. Wait at least 30 seconds, then plug the power back into your Shaw Modem
  4. Wait until the Shaw Modem is online, as indicated by a steady Online light
  5. Turn on your computer and test your Internet connection

 

 

If you are unable to connect to the Internet after bypassing your router, please contact our technical support line at 1-888-472-2222. Otherwise, if you are able to connect to the Internet while connected directly to the modem, you will need to consult the manufacturer of your router for further support.

 

 

Manufacturer Contact Numbers

Manufacturer

Support Line

3Com

800-876-3266

 

Aopen

888-97-AOpen

 

Belkin

877-736-5771

 

BenQ

866-600-2367

 

D- Link

800-361-5265

 

Linksys

800-326-7114

 

Netgear

888-638-4327

 

Trendnet

866-845-3673

 

Vonage

877-272-0528

 

 

Powered by HostBill